 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 3 V, WIDEBAND MEDIUM POWER SI MMIC AMPLIFIER FEATURES * 7 dBm P1dB TYPICAL AT 1.9 GHz * LOW VOLTAGE: 3 Volts * WIDE BANDWIDTH: 2.9 GHz at -3 dB (UPC2762T) Gain, GS (dB) 24 22 UPC2763T 20 18 16 14 UPC2762T 12 UPC2762T UPC2763T GAIN vs. FREQUENCY VCC = 3.0 V, ICC = 27 mA * HIGH GAIN: 20 dB at 1.9 GHz (UPC2763T) * SUPER SMALL PACKAGE * TAPE AND REEL PACKAGING OPTION AVAILABLE DESCRIPTION The UPC2762T and UPC2763T are Silicon Monolithic integrated circuits which are manufactured using the NESAT III process. The NESAT III process produces transistors with fT approaching 20 GHz. These amplifiers were designed for 900 MHz and 1.9 GHz receivers in cellular, cordless telephone and PCN applications. Operating on a 3 volt supply these ICs are ideally suited for hand-held, portable designs. NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. 10 8 100 300 1000 3000 Frequency, f (MHz) ELECTRICAL CHARACTERISTICS (TA = 25C, ZL = ZS = 50, VCC = 3.0 V) PART NUMBER PACKAGE OUTLINE SYMBOLS ICC GS fU1 P1dB PSAT NF RLIN RLOUT ISOL OIP3 RTH (J-A) PARAMETERS AND CONDITIONS Circuit Current (no signal) Small Signal Gain, f = 900 MHz f = 1900 MHz UNITS mA dB dB GHz dBm dBm dBm dBm dB dB dB dB dB dB dB dB dBm dBm C/W C/W 6 5.5 8 9 22 20 11 11.5 2.7 +5.5 +4.5 MIN UPC2762T T06 TYP 27 13 14.5 2.9 +8 +7 9 8.5 6.5 7 9 8.5 11 12 27 25 +12 +9 620 230 8 8.5 8 9 5 6 25 24 MAX 35 16 17.5 16 16.5 2.0 +7 +4 MIN UPC2763T T06 TYP 27 20 19.5 2.4 +9.5 +6.5 11 8 5.5 5.5 11 12 8 9 30 29 +17 +11 620 230 7.0 7.0 MAX 35 23 22.5 Upper Limit Operating Frequency (The gain at fu is 3 dB down from the gain at 0.1 GHz) Output Power at 1 dB Compression Point, f = 900 MHz f = 1900 MHz Saturated Output Power, f = 900 MHz f = 1900 MHz Noise Figure, Input Return Loss, Output Return Loss, Isolation, f = 900 MHz f = 1900 MHz f = 900 MHz f = 1900 MHz f = 900 MHz f = 1900 MHz f = 900 MHz f = 1900 MHz f = 1900, 1902 MHz Thermal Resistance (Junction to Ambient) Free Air Mounted on a 50 x 50 x 1.6 mm epoxy glass PWB SSB Output Third Order Intercept Point f = 900, 902 MHz Note: 1.The gain at fU is 3 dB down from the gain at 100 MHz. California Eastern Laboratories UPC2762T, UPC2763T ABSOLUTE MAXIMUM RATINGS1 (TA = 25C) SYMBOLS VCC ICC PIN PT TOP TSTG PARAMETERS Supply Voltage Total Supply Current Input Power Total Power Dissipation2 Operating Temperature Storage Temperature UNITS V mA dBm mW C C RATINGS 3.6 70 +10 280 -40 to +85 -55 to +150 RECOMMENDED OPERATING CONDITIONS SYMBOLS VCC TOP PARAMETERS Supply Voltage Operating Temperature UNITS MIN V C 2.7 -40 TYP MAX 3 25 3.3 85 TEST CIRCUIT VCC 1000 pF Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on a 50 x 50 x 1.6 mm epoxy glass PWB (TA = 85C). 50 IN 1000 pF 1 L = 300 nH 6 4 2, 3, 5 1000 pF 50 OUT TYPICAL PERFORMANCE CURVES (TA = 25C) UPC2762T/63T SUPPLY CURRENT vs. SUPPLY VOLTAGE 50 UPC2762T/63T SUPPLY CURRENT vs. OPERATING TEMPERATURE 50 VCC = 3.0 V Supply Current, ICC (mA) Supply Current, ICC (mA) 40 40 30 30 20 20 10 10 0 0 1 2 3 4 0 -60 -40 -20 0 20 40 60 80 100 Supply Voltage, VCC (V) Operating Temperature, TOP (C) UPC2762T NOISE FIGURE AND GAIN vs. FREQUENCY AND VOLTAGE 20 18 UPC2763T NOISE FIGURE AND GAIN vs. FREQUENCY AND VOLTAGE 24 22 VCC = 3.3 V Noise Figure, NF (dB) 16 14 12 10 8 NF 6 4 2 0.1 0.3 VCC = 2.7 V GS 20 Gain, GS (dB) 18 16 14 12 10 VCC = 3.0 V VCC = 2.7 V 10 VCC = 3.3 V 8 6 VCC = 3.0 V VCC = 2.7 V 4 2 1.0 3.0 7 VCC = 3.3 V NF 5 VCC = 3.0 V VCC = 2.7 V 4 3 3.0 6 8 6 0.1 0.3 1.0 Frequency, f (GHz) Frequency, f (GHz) Noise Figure, NF (dB) VCC = 3.3 V VCC = 3.0 V GS Gain, GS (dB) UPC2762T, UPC2763T TYPICAL PERFORMANCE CURVES (TA = 25C) UPC2762T GAIN vs. FREQUENCY AND TEMPERATURE 18 UPC2763T GAIN vs. FREQUENCY AND TEMPERATURE 24 TA = -40C 22 TA = +85C TA = +25C 16 Gain, GS (dB) Gain, GS (dB) TA = +85 C 20 18 16 14 12 TA = +25C TA = -40C TA = +85C 14 12 TA = -40 C 10 TA = +25 C TA = +25 C TA = -40 C 10 8 8 0.1 0.3 1.0 VCC = 3.0V 3.0 VCC = 3.0V 6 0.1 0.3 1.0 3.0 Frequency, f (GHz) Frequency, f (GHz) UPC2762T INPUT AND OUTPUT RETURN LOSS vs. FREQUENCY 0 VCC = 3.0V RLin -10 -10 0 UPC2763T INPUT AND OUTPUT RETURN LOSS vs. FREQUENCY VCC = 3.0V RLout Return Loss (dB) RLout -20 Return Loss (dB) RLin -20 -30 -30 -40 0.1 0.3 1.0 3.0 -40 0.1 0.3 1.0 3.0 Frequency, f (GHz) Frequency, f (GHz) UPC2762T ISOLATION vs. FREQUENCY 10 VCC = 3.0V 0 0 UPC2763T ISOLATION vs. FREQUENCY VCC = 3.0V -10 Isolation, ISOL (dB) -10 Isolation, ISOL (dB) -20 -20 -30 -30 -40 -40 0.1 0.3 1.0 3.0 -50 0.1 0.3 1.0 3.0 Frequency, f (GHz) Frequency, f (GHz) UPC2762T, UPC2763T TYPICAL PERFORMANCE CURVES (TA = 25C) UPC2762T OUTPUT POWER vs. INPUT POWER 15 VCC = 3.3V f = 900 MHZ f = 900 MHZ 15 VCC = 3.3V UPC2763T OUTPUT POWER vs. INPUT POWER Output Power, POUT (dBm) 10 VCC = 3.0V 5 VCC = 2.7V Output Power, POUT (dBm) 10 VCC = 3.0V 5 VCC = 2.7V 0 0 -5 -5 -10 -25 -20 -15 -10 -5 0 -10 -25 -20 -15 -10 -5 0 Input Power, PIN (dBm) Input Power, PIN (dBm) UPC2762T SATURATED OUTPUT POWER vs. FREQUENCY AND VOLTAGE 13 15 UPC2763T SATURATED OUTPUT POWER vs. FREQUENCY AND VOLTAGE Saturated Output Power, PSAT (dBm) Pin = -3 dBm 13 VCC = 3.3V Saturated Output Power, PSAT (dBm) Pin = +3 dBm VCC = 3.3V 11 VCC = 3.0V 9 11 VCC = 3.0V 9 VCC = 2.7V 7 7 VCC = 2.7V 5 5 3 0.1 0.3 1.0 3.0 3 0.1 0.3 1.0 3.0 Frequency, f (GHz) Frequency, f (GHz) UPC2762T SATURATED OUTPUT POWER vs. FREQUENCY AND TEMPERATURE 13 UPC2763T SATURATED OUTPUT POWER vs. FREQUENCY AND TEMPERATURE 15 Saturated Output Power, PSAT (dBm) Pin = +3 dBm Saturated Output Power, PSAT (dBm) Pin = -3 dBm 13 TA = +85 C 11 TA = -40 C TA = +25 C 9 11 TA = +25 C TA = +85 C 9 TA = -40 C 7 7 5 5 3 0.1 0.3 1.0 3.0 3 0.1 0.3 1.0 3.0 Frequency, f (GHz) Frequency, f (GHz) UPC2762T, UPC2763T TYPICAL SCATTERING PARAMETERS (TA = 25C) UPC2762T S11 vs. FREQUENCY (VCC = 3.0 V) UPC2762T S22 vs. FREQUENCY (VCC = 3.0 V) 0.1 GHz 0.9 GHz 1.9 GHz 1.9 GHz 0.9 GHz 0.1 GHz UPC2763T S11 vs. FREQUENCY (VCC = 3.0 V) UPC2763T S22 vs. FREQUENCY (VCC = 3.0 V) 0.1 GHz 0.9 GHz 1.9 GHz 1.9 GHz 0.1 GHz 0.9 GHz UPC2762T, UPC2763T OUTLINE DIMENSIONS (Units in mm) PACKAGE OUTLINE T06 +0.2 2.8 -0.3 +0.2 1.5 -0.1 2 LEAD CONNECTIONS (Top View) (Bottom View) C1Z 3 4 4 3 5 5 2 2.90.2 3 0.95 4 1 6 6 1 1.90.2 2 0.95 5 1 6 -0.05 0.3 +0.10 +0.2 1.1 -0.1 1. 2.. 3. 4. 5. 6. INPUT GND GND OUTPUT GND VCC Note: Package Marking C1Z: UPC2762T C2A: UPC2763T 0.8 0.130.1 0 to 0.1 Note: All dimensions are typical unless otherwise specified. EQUIVALENT CIRCUIT VCC RECOMMENDED P.C.B. LAYOUT (Units in mm) 3.10 OUT 3 4 0.95 IN 2 5 1 6 0.5 MIN 1.0 MIN 1.0 MIN ORDERING INFORMATION PART NUMBER UPC2762T-E3 UPC2763T-E3 Note: Embossed Tape, 8 mm wide. QTY 3K/Reel 3K/Reel EXCLUSIVE AGENT FOR NEC Corporation RF & MICROWAVE SEMICONDUCTOR PRODUCTS - U.S. & CANADA CALIFORNIA EASTERN LABORATORIES, INC * Headquarters * 4590 Patrick Henry Drive * Santa Clara, CA 95054-1817 * (408) 988-3500 * Telex 34-6393/FAX (408) 988-0279 DATA SUBJECT TO CHANGE WITHOUT NOTICE |
Price & Availability of UPC2762T-E3
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |